• GPC MD Logo

  • Apply with Paper Application

  • We support renewable energy and partner with our customers to ensure safe and reliable interconnection of renewable energy into the electric grid.

    Delmarva Power strongly recommends all customers complete the Net Energy Metering and Interconnection Application through our online application process.  However, the option remains to download a paper application from the following table and mail it in to our Green Power Connection Team. Click in the table below for the appropriate application and agreement.  The nameplate capacity is the maximum output, expressed in kilowatts, of an electric generator under specific conditions designated by the manufacturer, as indicated on the nameplate physically attached to the generator.   

    This table contains the current paper application forms. Applications dated July, 2015 and later will be accepted. Prior versions of the application forms should no longer be used.

    NAMEPLATE CAPACITY APPLICATIONS AND AGREEMENTS FOR Maryland
    Level 1
    10 KW OR LESS and inverter-based
    INTERCONNECTION APPLICATION/AGREEMENT LEVEL 1
    Level 2
    2 MW or less
    radial distribution circuit or spot network serving one customer
    INTERCONNECTION APPLICATION/AGREEMENT LEVEL 2 to 4
    Level 3
    area networks (50 kW or less)
    radial distribution circuits (10 MW or less)
    INTERCONNECTION APPLICATION/AGREEMENT LEVEL 2 TO 4
    Level 4
    10 mw or less and not level 1, 2 or 3
    INTERCONNECTION APPLICATION/AGREEMENT LEVEL 2 TO 4
    Aggregated Net Energy Metering (ANEM) anem application rider
    COMBINED HEAT AND POWER COMBINED HEAT AND POWER INTERCONNECTION APPLICATION AGREEMENT
     energy storagesupplemental form 

    Customers requesting aggregated net energy metering will need to submit the appropriate-level interconnection application and agreement plus the anem application rider. Information is available on the newly emerging community net energy metering, and customers interested in combined heat and power projects will complete this application.

    APPLICATION FEES

    After Delmarva Power receives your paper application, the system automatically determines if an application fee is required and calculates the required fee, based on the jurisdiction, system size, and application level. The online system automatically creates and emails an invoice to the contractor or customer.  

    NAMEPLATE CAPACITY APPLICATION FEE
    LEVEL 1
    10 kw or less and inverter-based
    No fee
    LEVEL 2
    2 MW OR LESS
    RADIAL DISTRIBUTION CIRCUIT OR SPOT NETWORK SERVING
    ONE CUSTOMER
    $50 + $1 per AC Inverter Rating KW
    LEVEL 3
    area networks (50 kW or less)
    radial distribution circuits (10 MW or less)
    $100 +$2 per AC INVERTER RATING kw
    LEVEL 4
    10 MW or less and not Level 1, 2, or 3
    $100 +$2 PER AC INVERTER RATING KW
    Aggregated Net Energy Metering (ANEM) NO FEE

    Other Forms

    Delmarva Power will communicate with you during the application process if the following documents are needed.

    Interconnection Feasibility Study Agreement
    Level 1 Interconnection Agreement Change Notice